Manufacturers

FEATURES

Installation

Terminal Layout: Two-Sided
Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals

General

Amplifier Type: Class-D (Digital)
Channel Design: 2 Channel
Thermal Control: Thermal Management Control
Power Supply: MOSFET
Power Supply Design: DC-DC PWM Power Supply
Board Circuitry: S.T.A.R. Circuitry
Current Protection: Over-Current, Over-Voltage and Thermal Protection
Power Indicator: Top Mounted Blue LED Power Indicator
2-Channel Speaker Level Input
Crossover: Variable Lowpass & Highpass Filter
Built-in Bass EQ
Final Outputs: Direct FET
Board Design: 6-layer Glass Epoxy PC Board
Continuously Adjustable Gain Control

SPECIFICATIONS

Max Power Output Ratings

Total Max Power: 350W

RMS Power Ratings

Per Channel into 4ohms, 14.4V (≤1%THD+N): 2 x 50W
Per Channel into 2ohms, 14.4V (≤1%THD+N): 2 x 75W
Bridged into 4ohms, 14.4V (≤1%THD+N): 1 x 150W

Sound Tuning

Crossover Frequency (LPF/HPF Selectable): Variable, 50 - 400Hz (-12dB/oct.)
EQ (Equalizer): Bass EQ (fc=50Hz) 0 to +12dB

Dimensions

Heat Sink: 190 x 58 x 230 mm
Footprint: 250 x 58 x 230 mm

General

Power Requirements: 14.4V DC (11 - 16V)
Input Sensitivity (RCA Input): 0.2 - 4.0V
Input Sensitivity (Speaker Level Input): 0.5 - 10V
Input Impedance: >10k ohms
Frequency Response (+0, -3dB: 1W into 4 ohms): 5Hz - 45kHz
Frequency Response (+0, -1dB: 1W into 4 ohms): 7Hz - 30kHz
THD+N (10W into 4 ohms): <0.02%
THD+N (Rated Power into 4 ohms): <0.07%
Damping Factor: >500
Signal to Noise (Rated Power into 4 ohms): 104dB
Weight: 2.3kg

209,00€

PATROL CAR ALARM

159,00€

Alpine MRX M240 1 Channel amplifier 4400 watts Class D

Περιγραφή

ALPINE MRX-M 240

ΤΕΧΝΙΚΑ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

FEATURES

Installation

Terminal Layout: Two-Sided
Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals

General

Amplifier Type: Class-D (Digital)
Channel Design: 1 Channel (Mono)
Thermal Control: Thermal Management Control
Power Supply: MOSFET
Power Supply Design: DC-DC PWM Power Supply
Board Circuitry: S.T.A.R. Circuitry
Current Protection: Over-Current, Over-Voltage and Thermal Protection
Power Indicator: Top Mounted Blue LED Power Indicator
4-channel Speaker Level Inputs
Stereo PreOuts
Crossover: Variable Lowpass Filter
Built-in adjustable Bass EQ
Built-in variable Subsonic Filter
Final Outputs: Direct FET
Board Design: 6-layer Glass Epoxy PC Board
Gain Control: Continuously Adjustable Gain Control
Bass Control: Remote Bass Control ( RUX-KNOB sold separately )

SPECIFICATIONS

Max Power Output Ratings

Max Power: 4400W

RMS Power Ratings

Per Channel into 4ohms, 14.4V (≤1%THD+N): 1500W
Per Channel into 2ohms, 14.4V (≤1%THD+N): 2400W

Sound Tuning

Crossover Frequency (LPF): 50 - 400Hz (-24dB/oct.)
EQ (Equalizer): Bass EQ (fc=30 to 80Hz) 0 to +12dB
Subsonic: OFF, 5 - 30Hz (-24dB/oct.)

Dimensions

Heat Sink: 462 x 58 x 230 mm

General

Power Requirements: 14.4V DC (11 - 16V)
Input Sensitivity (RCA Input): 0.1 - 4.0V
Input Sensitivity (Speaker Level Input): 0.25 - 10V
Input Impedance: >10k ohms
Frequency Response (+0, -3dB: 1W into 4 ohms): 5 - 400Hz
Frequency Response (+0, -1dB: 1W into 4 ohms): 10 - 300Hz
THD+N (10W into 4 ohms): <0.01%
THD+N (Rated Power into 4 ohms): <0.04%
Damping Factor: >1000
Signal to Noise (Rated Power into 4 ohms): 108dB
Preamp Output: 4V max.
Remote Level: 0 to -20dB ( RUX-KNOB Required )
Weight: 5.4kg

595,00€

HIFONICS ZX 6400 Car Amp 4 x 170 Watts

4 X 85 Watts RMS into 4 Ohms
4 X 170 Watts RMS into 2 Ohms
2 X 340 Watts RMS into 4 Ohms
New Hifonics Twentieth Anniversary Heat Sink Design
Illuminated Hifonics Badge
Illuminated Maxxsonics "M"
Bass Remote with Blue LED Power On & Diagnostic Indicator Included
Ultra-Fi Mosfet
Zeus EVXP (Exponential Vari-Power Supply)
SPC - Simpatico Coil Design
HSMD - Hifonics Surface Mount Design
Fully Adjustable Accu-Cross Crossovers
PWM Mosfet Power Supply
Line Output for Amplifier Daisy Chaining
Variable Bass Equalization
Sub-Sonic Filter
4 Gauge Power Connectors
Additional High Speed Mosfet Output Devices
Class AB Operation
Maxi-Fuse
Power From The Gods Included
1-year SonicElectronix.com warranty

495,00€

Silikon Shock Sensor

15,00€

Alpine PMX-F640 4 channel amplifier 640 watts

Alpine PMX-F640 4 channel car amplifier

Alpine PMX-F640 give you power performance at an amazing price. Alpine PMX-F640 is designed to fit easily in any system. Alpine PMX-F640 car amplifier has a built-in high pass and low pass filters let you set the frequency points to match your speakers and ensure optimum efficiency. Alpine PMX-F640 also enhance their performance with Bass EQ, now you can get even more powerful bass.

Alpine PMX-F640 features:

Amplifier Type: Class-A/B
640 watts 4 channel amplifier
Per Channel into 4ohms (≤1%THD+N): 4 x 50W
Per Channel into 2ohms (≤1%THD+N): 4 x 75W
Bridged into 4ohms (≤1%THD+N): 2 x 150W
Channel Design: 4/3/2 Channel
Thermal Control: Thermal Management Control
Power Supply: DC-DC PWM Power Supply
Power Supply Design: MOSFET Power
Board Circuitry: STAR Circuitry
Current Protection: Over-Current, Over-Voltage and Thermal Protection
Power Indicator: Top Mounted Blue LED Power Indicator
RCA Output: Gold Plated RCA Input Connectors
Speaker-Level Inputs: Speaker Level Inputs
Crossover: Selectable Low-Pass / High-Pass
Connector Plating: Gold Plated Input, Output, Power and Speaker Terminals
Pre-Amp Stage: Discrete
Final Outputs: Non-Fading Pre-Amp Output
Gain Control: Continuously Adjustable Gain Control
Crossover Frequency (Fix, OFF/LPF/HPF Selectable) 1/2 ch: 80 Hz (-18dB/oct)
Crossover Frequency (Fix, OFF/LPF/HPF Selectable) 3/4 ch: 80 Hz (-18dB/oct)
EQ (Equalizer): Bass EQ Fixed Frequency 50 Hz _ Selectable Gain 0/+6/+12 dB (3/4ch)
Power Requirements: 14.4 V DC (11 V to 16 V)
Input Sensitivity: 0.2 - 4.0 V (RCA IN)
Input Impedance: RCA IN 10k Ω / SP IN 10k Ω
Frequency Response: 10 Hz - 50 kHz (+ 0,-1 dB)
Speaker Impedance: 4 or 2 Ω
Signal to Noise: S/N Ratio (IHF A Weighted, Reference: rated power into 4ohms) 90 dB
Weight: 3.0 Kg
Footprint: 270 mm x 60 mm x 242 mm

159,00€

With choosen: