These digital powerhouses are so efficient, they’re much more compact than you expect. Advanced thermal protection means you can play them loud and the music never stops.

All Digital Lineup

The X-Power series uses much of the same digital technology as the PDX series, achieving high efficiency with excellent audio performance, including low distortion, high damping factor and high S/N ratio.

Easily Upgrade Any System

Speaker Level Inputs let you connect these amps directly to factory-installed head units that do not have preamp outputs, so you can upgrade the original system with higher power and better speakers.

Remote Sensing

The remote sensing function turns the power on automatically when the amp detects an incoming audio signal. There is no more need for an extra remote line.

Smaller Footprint

PDX digital technology means high efficiency, so the X-Power amps are up to 29% more compact than previous models, making installation even more convenient.

Effective Heat Protection

If interior heat reaches unacceptably high levels, a Thermal Protection circuit decreases power in two steps rather than interrupting the music. It also provides over-voltage and overcurrent protection.

Remote Control Bass Knob (RUX-KNOB)

Simply add the RUX-KNOB (sold separately) and get full control from the dash for instant bass adjustment. You also get the ability to control multiple amps from just one controller with simple telephone cord adapters.

Χαρακτηριστικά & Λεπτομέρειες

FEATURES

Installation

Terminal Layout: Two-Sided
Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals

General

Amplifier Type: Class-D (Digital)
Channel Design: 4 Channel + Subwoofer
Thermal Control: Thermal Management Control
Power Supply: MOSFET
Power Supply Design: DC-DC PWM Power Supply
Board Circuitry: S.T.A.R. Circuitry
Current Protection: Over-Current, Over-Voltage and Thermal Protection
Power Indicator: Top Mounted Blue LED Power Indicator
4-Channel Speaker Level Input
Crossover: Variable Lowpass & Highpass Filter
Built-in Bass EQ
Built-in Subsonic Filter
Final Outputs: Direct FET
Board Design: 6-layer Glass Epoxy PC Board
Continuously Adjustable Gain Control
Remote Bass Control ( RUX-KNOB sold separately )

SPECIFICATIONS

Max Power Output Ratings

Max Power: 1200W

RMS Power Ratings

Per Channel into 4ohms, 14.4V (≤1%THD+N): 4 x 60W + 250W
Per Channel into 2ohms, 14.4V (≤1%THD+N): 4 x 90W + 350W
Bridged into 4ohms, 14.4V (≤1%THD+N): 2 x 180W

Sound Tuning

Crossover Frequency (LPF): 50 - 400Hz (-24dB/oct.) for Subwoofer
Crossover Frequency (HPF): 50 - 400Hz (-12dB/oct.) for CH-1/2/3/4
EQ (Equalizer): Bass EQ (fc=50Hz) 0 to +12dB
Subsonic: OFF / 5 - 30Hz (-24dB/oct.)

Dimensions

Heat Sink: 210 x 58 x 230 mm
Footprint: 270 x 58 x 230 mm

General

Power Requirements: 14.4V DC (11 - 16V)
Input Sensitivity (RCA Input): 0.1 - 4.0V
Input Sensitivity (Speaker Level Input): 0.5 - 10V
Input Impedance: >10k ohms
Frequency Response (+0, -3dB: 1W into 4 ohms) for CH-1/2/3/4: 5Hz - 45kHz
Frequency Response (+0, -3dB: 1W into 4 ohms) for Subwoofer: 5 - 400Hz
Frequency Response (+0, -1dB: 1W into 4 ohms) for CH-1/2/3/4: 7Hz - 30kHz
Frequency Response (+0, -1dB: 1W into 4 ohms) for Subwoofer: 10Hz - 300Hz
THD+N (10W into 4 ohms) for CH-1/2/3/4 ≤ 0.02%
THD+N (10W into 4 ohms) for Subwoofer ≤ 0.008%
THD+N (Rated Power into 4 ohms) for CH-1/2/3/4 ≤ 0.07%
THD+N (Rated Power into 4 ohms) for Subwoofer ≤ 0.04%
Damping Factor for CH-1/2/3/4: >500
Damping Factor for Subwoofer: >1000
Signal to Noise (Rated Power into 4 ohms) for CH-1/2/3/4: 104dB
Signal to Noise (Rated Power into 4 ohms) for Subwoofer: 110dB
Remote Level: 0 to -20dB ( RUX-KNOB Required )
Weight: 2.8kg

389,00€

Με τα επιλεγμένα: