Manufacturers
Categories
Οθόνη οροφής
Banner Αριστερό 2
bannerleft3
My Compare List contains:
YOU CANNOT COMPARE UP TO 8 PRODUCTS!
Alpine MRX-T15 2 channel power amplifier
Alpine MRX-T15 2 channel power amplifier
Περιγραφή

ALPINE MRX-T 15

ΤΕΧΝΙΚΑ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

FEATURES

Installation

  • Terminal Layout: Two-Sided
  • Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals

General

  • Amplifier Type: Class-D (Digital)
  • Channel Design: 2 Channel
  • Thermal Control: Thermal Management Control
  • Power Supply: MOSFET
  • Power Supply Design: DC-DC PWM Power Supply
  • Board Circuitry: S.T.A.R. Circuitry
  • Current Protection: Over-Current, Over-Voltage and Thermal Protection
  • Power Indicator: Top Mounted Blue LED Power Indicator
  • 2-Channel Speaker Level Input
  • Crossover: Variable Lowpass & Highpass Filter
  • Built-in Bass EQ
  • Final Outputs: Direct FET
  • Board Design: 6-layer Glass Epoxy PC Board
  • Continuously Adjustable Gain Control

SPECIFICATIONS

Max Power Output Ratings

  • Total Max Power: 350W

RMS Power Ratings

  • Per Channel into 4ohms, 14.4V (≤1%THD+N): 2 x 50W
  • Per Channel into 2ohms, 14.4V (≤1%THD+N): 2 x 75W
  • Bridged into 4ohms, 14.4V (≤1%THD+N): 1 x 150W

Sound Tuning

  • Crossover Frequency (LPF/HPF Selectable): Variable, 50 - 400Hz (-12dB/oct.)
  • EQ (Equalizer): Bass EQ (fc=50Hz) 0 to +12dB

Dimensions

  • Heat Sink: 190 x 58 x 230 mm
  • Footprint: 250 x 58 x 230 mm

General

  • Power Requirements: 14.4V DC (11 - 16V)
  • Input Sensitivity (RCA Input): 0.2 - 4.0V
  • Input Sensitivity (Speaker Level Input): 0.5 - 10V
  • Input Impedance: >10k ohms
  • Frequency Response (+0, -3dB: 1W into 4 ohms): 5Hz - 45kHz
  • Frequency Response (+0, -1dB: 1W into 4 ohms): 7Hz - 30kHz
  • THD+N (10W into 4 ohms): <0.02%
  • THD+N (Rated Power into 4 ohms): <0.07%
  • Damping Factor: >500
  • Signal to Noise (Rated Power into 4 ohms): 104dB
  • Weight: 2.3kg

209,00€ 

Alpine PDX-V9 l  Digital Mono Channel Power Amplifier
Alpine PDX-V9 l Digital Mono Channel Power Amplifier

Alpine PDX-M6 Digital Mono Amplifier, 1200W Max Power @ 14.4V, 1 x 600W RM

Hi-specification, top-of-the range, CLASS-D mono Amplifier

SPECIFICATION:

  • CEA-2006 Power Rating: (@14.4V THD+N), S/N: 92dBA: 1200W x 1
  • RMS Power Ratings
  • Per channel into 4 Ohms: (@ 14.4V) 600W x 1
  • Per channel into 2 Ohms: (@ 14.4V) 600W x 1
  • Sound Tuning
  • Crossover: Variable, 50Hz - 400Hz (-24dB / oct), (Variable, L.P.F Only, 1/2 ch)
  • Subsonic Filter: OFF / 15Hz / 30Hz
  • Dimensions
  • Heat Sink (WxHxD) mm: 257mm x 192mm x 50.8mm
  • Heat Sink (WxHxD) in: 10-1/8' x 7-9/16' x 2'
  • General
  • Power Requirements: 14.4V DC (11V to 16V)
  • Input Sensitivity: Select Vol, 0.1V to 1.0V or 1.0V to 8.0V (For Rated Power)
  • Cable size: 4 AWG (BATT and GND), 12 AWG (Remote), Up to 8 AWG (Speaker)
  • Frequency Response: 5 Hz - 400 kHz / 0dB ~ -3dB (Reference: 1 W into 4 ohms)
  • Speaker Impedance: 4 or 2 ohm
  • Signal to Noise: CEA 2006 S/N Ratio (IHF A Weighted, Reference: 1W into 4-ohm) 95dBA
  • FEATURES: Install
  • Connectors: Quick Disonnect Terminals (Power Terminal and Speaker Terminals)
  • Terminal Layout: One-Sided
  • Mounting Design: Easy Stacking and Clean-look installation
  • General
  • Amplifier Type: Class-D (Digital)
  • Channel Design: 1 Channel (Mono)
  • Thermal Protection
  • Low-battery Protection
  • Power Supply: Resonant Mode Power Supply
  • Power Supply Design: DC-DC PWM Power Supply
  • Board Circuitry: STAR Circuit
  • Current Protection: Auto Over-Current Protection
  • Power Indicator: Top Mounted Blue LED Power/Status Indicator
  • RCA Output: Non-Fading Pre-Amp Output
  • Crossover: Adjustable Low-Pass
  • Pre-Amp Stage: Discrete
  • Final Outputs: MOSFET
  • Board Design: 6-Layer Glass Epoxy PC Board
  • Gain Control: Adjustable
  • Bass Control: Remote Bass Control (RUX-KNOB - Sold Separately)


419,00€ 

Alpine PDX-V12  Digital Mono Channel Power Amplifier 2500Watts
Alpine PDX-V12 Digital Mono Channel Power Amplifier 2500Watts

Alpine PDX-M12 Digital Mono Amplifier, 2500W Max Power @ 14.4V, 1 x 1200W R

Hi-specification, top-of-the range, CLASS-D mono Amplifier

SPECIFICATION:

  • CEA-2006 Power Rating: (@14.4V THD+N), S/N: 95dBA: 600W x 1
  • RMS Power Ratings
  • Per channel into 4 Ohms: (@ 14.4V) 1200W x 1
  • Per channel into 2 Ohms: (@ 14.4V) 1200W x 1
  • Sound Tuning
  • Crossover: Variable, 50Hz - 400Hz (-24dB / oct), (Variable, L.P.F Only 1/2 ch)
  • Subsonic Filter: OFF / 15Hz / 30Hz
  • Dimensions
  • Heat Sink (WxHxD) mm: 257mm x 192mm x 50.8mm
  • Heat Sink (WxHxD) in: 10-1/8' x 7-9/16' x 2'
  • General
  • Power Requirements: 14.4V DC (11V to 16V)
  • Input Sensitivity: Select Vol, 0.1V to 1.0V or 1.0V to 8.0V (For Rated Power)
  • Cable size: 4 AWG (BATT and GND), 12 AWG (Remote), Up to 8 AWG (Speaker)
  • Frequency Response: 5 Hz - 400 kHz / 0dB ~ -3dB (Reference: 1 W into 4 ohms)
  • Speaker Impedance: 4 or 2 ohm
  • Signal to Noise: CEA 2006 S/N Ratio (IHF A Weighted, Reference: 1W into 4-ohm) 95dBA
  • FEATURES: Install
  • Connectors: Quick Disonnect Terminals (Power Terminal and Speaker Terminals)
  • Terminal Layout: One-Sided
  • Mounting Design: Easy Stacking and Clean-look installation
  • General
  • Amplifier Type: Class-D (Digital)
  • Channel Design: 1 Channel (Mono)
  • Thermal Protection
  • Low-battery Protection
  • Power Supply: Resonant Mode Power Supply
  • Power Supply Design: DC-DC PWM Power Supply
  • Board Circuitry: STAR Circuit
  • Current Protection: Auto Over-Current Protection
  • Power Indicator: Top Mounted Blue LED Power/Status Indicator
  • RCA Output: Non-Fading Pre-Amp Output
  • Crossover: Adjustable Low-Pass
  • Pre-Amp Stage: Discrete
  • Final Outputs: MOSFET
  • Board Design: 6-Layer Glass Epoxy PC Board
  • Gain Control: Adjustable
  • Bass Control: Remote Bass Control (RUX-KNOB - Sold Separately)


639,00€ 

Alpine MRX M55 1 Channel amplifier 1100 watts  Class D
Alpine MRX M55 1 Channel amplifier 1100 watts Class D
Περιγραφή

ALPINE MRX-M 55

ΤΕΧΝΙΚΑ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

FEATURES

Installation

  • Terminal Layout: Two-Sided
  • Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals

General

  • Amplifier Type: Class-D (Digital)
  • Channel Design: 1 Channel (Mono)
  • Thermal Control: Thermal Management Control
  • Power Supply: MOSFET
  • Power Supply Design: DC-DC PWM Power Supply
  • Board Circuitry: S.T.A.R. Circuitry
  • Current Protection: Over-Current, Over-Voltage and Thermal Protection
  • Power Indicator: Top Mounted Blue LED Power Indicator
  • Speaker-Level Inputs
  • Crossover: Variable Lowpass Filter
  • Built-in Bass EQ
  • Built-in Subsonic Filter
  • Final Outputs: Direct FET
  • Board Design: 6-layer Glass Epoxy PC Board
  • Gain Control: Continuously Adjustable Gain Control
  • Bass Control: Remote Bass Control ( RUX-KNOB sold separately )

SPECIFICATIONS

Max Power Output Ratings

  • Max Power: 1100W

RMS Power Ratings

  • Per Channel into 4ohms, 14.4V (≤1%THD+N): 350W
  • Per Channel into 2ohms, 14.4V (≤1%THD+N): 550W

Sound Tuning

  • Crossover Frequency (LPF): 50 - 400Hz (-24dB/oct.)
  • EQ (Equalizer): Bass EQ (fc=50Hz) 0 to +12dB
  • Subsonic: 5 - 30Hz (-24dB/oct.)

Dimensions

  • Heat Sink: 190 x 58 x 230 mm
  • Footprint: 250 x 58 x 230 mm

General

  • Power Requirements: 14.4V DC (11 - 16V)
  • Input Sensitivity (RCA Input): 0.1 - 4.0V
  • Input Sensitivity (Speaker Level Input): 0.25 - 10V
  • Input Impedance: >10k ohms
  • Frequency Response (+0, -3dB: 1W into 4 ohms): 5 - 400Hz
  • Frequency Response (+0, -1dB: 1W into 4 ohms): 10 - 300Hz
  • THD+N (10W into 4 ohms): <0.004%
  • THD+N (Rated Power into 4 ohms): <0.06%
  • Damping Factor: >1000
  • Signal to Noise (Rated Power into 4 ohms): 114dB
  • Preamp Output: 4V max.
  • Remote Level: 0 to -20dB ( RUX-KNOB Required )
  • Weight: 2.6kg


235,00€ 

Alpine PMX-T320 2 channel amplifier 320 watts
Alpine PMX-T320 2 channel amplifier 320 watts

Alpine PMX-T320 2 channel car amplifier

Alpine PMX-T320 give you power performance at an amazing price. Alpine PMX-T320 is designed to fit easily in any system. Alpine PMX-T320 car amplifier has a built-in high pass and low pass filters let you set the frequency points to match your speakers and ensure optimum efficiency. Alpine PMX-T320 also enhance their performance with Bass EQ, now you can get even more powerful bass.

Alpine PMX-T320 features:

  • Amplifier Type: Class-A/B
  • 320 watts 2 channel amplifier
  • Per Channel into 4ohms (≤1%THD+N): 2 x 50W
  • Per Channel into 2ohms (≤1%THD+N): 2 x 75W
  • Bridged into 4ohms (≤1%THD+N): 1 x 150W
  • Channel Design: 2/1 Channel
  • Thermal Control: Thermal Management Control
  • Power Supply: DC-DC PWM Power Supply
  • Power Supply Design: MOSFET Power
  • Board Circuitry: STAR Circuitry
  • Current Protection: Over-Current, Over-Voltage and Thermal Protection
  • Power Indicator: Top Mounted Blue LED Power Indicator
  • RCA Output: Gold Plated RCA Input Connectors
  • Speaker-Level Inputs: Speaker Level Inputs
  • Crossover: Selectable Low-Pass / High-Pass
  • Connector Plating: Gold Plated Input, Output, Power and Speaker Terminals
  • Pre-Amp Stage: Discrete
  • Final Outputs: Non-Fading Pre-Amp Output
  • Gain Control: Continuously Adjustable Gain Control
  • Crossover Frequency (Fix, OFF/LPF/HPF Selectable) 1/2 ch: 80 Hz (-18dB/oct)
  • EQ (Equalizer): Bass EQ Fixed Frequency 50 Hz _ Selectable Gain 0/+6/+12 dB (3/4ch)
  • Power Requirements: 14.4 V DC (11 V to 16 V)
  • Input Sensitivity: 0.2 - 4.0 V (RCA IN)
  • Input Impedance: RCA IN 10k Ω / SP IN 10k Ω
  • Frequency Response: 10 Hz - 50 kHz (+ 0,-1 dB)
  • Speaker Impedance: 4 or 2 Ω
  • Signal to Noise: S/N Ratio (IHF A Weighted, Reference: rated power into 4ohms) 90 dB
  • Weight: 2.0 Kg
  • Footprint: 210 mm x 60 mm x 242 mm


119,00€ 

Alpine PMX-F640 4 channel amplifier 640 watts
Alpine PMX-F640 4 channel amplifier 640 watts

Alpine PMX-F640 4 channel car amplifier

Alpine PMX-F640 give you power performance at an amazing price. Alpine PMX-F640 is designed to fit easily in any system. Alpine PMX-F640 car amplifier has a built-in high pass and low pass filters let you set the frequency points to match your speakers and ensure optimum efficiency. Alpine PMX-F640 also enhance their performance with Bass EQ, now you can get even more powerful bass.

Alpine PMX-F640 features:

  • Amplifier Type: Class-A/B
  • 640 watts 4 channel amplifier
  • Per Channel into 4ohms (≤1%THD+N): 4 x 50W
  • Per Channel into 2ohms (≤1%THD+N): 4 x 75W
  • Bridged into 4ohms (≤1%THD+N): 2 x 150W
  • Channel Design: 4/3/2 Channel
  • Thermal Control: Thermal Management Control
  • Power Supply: DC-DC PWM Power Supply
  • Power Supply Design: MOSFET Power
  • Board Circuitry: STAR Circuitry
  • Current Protection: Over-Current, Over-Voltage and Thermal Protection
  • Power Indicator: Top Mounted Blue LED Power Indicator
  • RCA Output: Gold Plated RCA Input Connectors
  • Speaker-Level Inputs: Speaker Level Inputs
  • Crossover: Selectable Low-Pass / High-Pass
  • Connector Plating: Gold Plated Input, Output, Power and Speaker Terminals
  • Pre-Amp Stage: Discrete
  • Final Outputs: Non-Fading Pre-Amp Output
  • Gain Control: Continuously Adjustable Gain Control
  • Crossover Frequency (Fix, OFF/LPF/HPF Selectable) 1/2 ch: 80 Hz (-18dB/oct)
  • Crossover Frequency (Fix, OFF/LPF/HPF Selectable) 3/4 ch: 80 Hz (-18dB/oct)
  • EQ (Equalizer): Bass EQ Fixed Frequency 50 Hz _ Selectable Gain 0/+6/+12 dB (3/4ch)
  • Power Requirements: 14.4 V DC (11 V to 16 V)
  • Input Sensitivity: 0.2 - 4.0 V (RCA IN)
  • Input Impedance: RCA IN 10k Ω / SP IN 10k Ω
  • Frequency Response: 10 Hz - 50 kHz (+ 0,-1 dB)
  • Speaker Impedance: 4 or 2 Ω
  • Signal to Noise: S/N Ratio (IHF A Weighted, Reference: rated power into 4ohms) 90 dB
  • Weight: 3.0 Kg
  • Footprint: 270 mm x 60 mm x 242 mm

 


159,00€ 


0,00€ 

Alpine MRX M110 1 Channel amplifier 1900 watts  Class D
Alpine MRX M110 1 Channel amplifier 1900 watts Class D

ΤΕΧΝΙΚΑ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

FEATURES

Installation

  • Terminal Layout: Two-Sided
  • Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals

General

  • Amplifier Type: Class-D (Digital)
  • Channel Design: 1 Channel (Mono)
  • Thermal Control: Thermal Management Control
  • Power Supply: MOSFET
  • Power Supply Design: DC-DC PWM Power Supply
  • Board Circuitry: S.T.A.R. Circuitry
  • Current Protection: Over-Current, Over-Voltage and Thermal Protection
  • Power Indicator: Top Mounted Blue LED Power Indicator
  • Speaker Level Inputs
  • Stereo PreOuts
  • Crossover: Variable Lowpass Filter
  • Built-in Bass EQ
  • Built-in Subsonic Filter
  • Final Outputs: Direct FET
  • Board Design: 6-layer Glass Epoxy PC Board
  • Gain Control: Continuously Adjustable Gain Control
  • Bass Control: Remote Bass Control ( RUX-KNOB sold separately )

SPECIFICATIONS

Max Power Output Ratings

  • Max Power: 1900W

RMS Power Ratings

  • Per Channel into 4ohms, 14.4V (≤1%THD+N): 650W
  • Per Channel into 2ohms, 14.4V (≤1%THD+N): 1100W

Sound Tuning

  • Crossover Frequency (LPF): 50 - 400Hz (-24dB/oct.)
  • EQ (Equalizer): Bass EQ (fc=50Hz) 0 to +12dB
  • Subsonic: OFF, 5 - 30Hz (-24dB/oct.)

Dimensions

  • Heat Sink: 280x 58 x 230 mm
  • Footprint: 340 x 58 x 230 mm

General

  • Power Requirements: 14.4V DC (11 - 16V)
  • Input Sensitivity (RCA Input): 0.1 - 4.0V
  • Input Sensitivity (Speaker Level Input): 0.25 - 10V
  • Input Impedance: >10k ohms
  • Frequency Response (+0, -3dB: 1W into 4 ohms): 5 - 400Hz
  • Frequency Response (+0, -1dB: 1W into 4 ohms): 10 - 300Hz
  • THD+N (10W into 4 ohms): <0.004%
  • THD+N (Rated Power into 4 ohms): <0.06%
  • Damping Factor: >1000
  • Signal to Noise (Rated Power into 4 ohms): 117dB
  • Preamp Output: 4V max.
  • Remote Level: 0 to -20dB ( RUX-KNOB Required )
  • Weight: 3.8kg


399,00€ 


With choosen: